Amendment AA54-SB275

LRBa3016/1

JTK:wlj:rs

2011 - 2012 LEGISLATURE

ASSEMBLY AMENDMENT 54, TO 2011 SENATE BILL 275

March 15, 2012 - Offered by Representative Mason.

SB275-AA54,1,2 At the locations indicated, amend the bill, as shown by senate substitute amendment 2, as follows:

SB275-AA54,1,6 1. Page 1, line 5: delete "Milwaukee area technical college district board" and substitute "the Chippewa Valley technical college district board, providing an exemption from and extending the time limit for emergency rule procedures, and granting rule-making authority".

SB275-AA54,1,9 2. Page 1, line 6: delete the material beginning with that line and ending with page 6, line 20, including the material inserted by senate amendment 1, and substitute:

SB275-AA54,1,10 " Section 1. 5.02 (3), (21) and (23) of the statutes are amended to read:

SB275-AA54,1,13 5.02 (3) "Educational officer" means the state superintendent, a member of the Chippewa Valley technical college district board, and a school board members member.

SB275-AA54,2,6 (21) "Spring election" means the election held on the first Tuesday in April to elect judicial officers, educational and officers other than the Chippewa Valley technical college district board members, municipal officers, nonpartisan county officers and sewerage commissioners and to express preferences for the person to be the presidential candidate for each party in a year in which electors for president and vice president are to be elected.

SB275-AA54,2,11 (23) "State office" means the offices of governor, lieutenant governor, secretary of state, state treasurer, attorney general, state superintendent, justice of the supreme court, court of appeals judge, circuit court judge, state senator, state representative to the assembly and, district attorney, and member of the Chippewa Valley technical college district board.

SB275-AA54, s. 2 Section 2. 5.62 (3) of the statutes, as affected by 2011 Wisconsin Acts 32 and 75, is amended to read:

SB275-AA54,2,23 5.62 (3) The board shall designate the official primary ballot arrangement for statewide offices, the Chippewa Valley technical college district board members, and district attorney within each prosecutorial district by using the same procedure as provided in s. 5.60 (1) (b). On each ballot and on each separate column or row on the ballot, the candidates for office shall be listed together with the offices which they seek in the following order whenever these offices appear on the partisan primary ballot: governor, lieutenant governor, attorney general, secretary of state, state treasurer, U.S. senator, U.S. representative in congress, state senator, representative to the assembly, Chippewa Valley technical college district board member, district attorney and the county offices.

SB275-AA54, s. 3 Section 3. 5.64 (1) (ag) of the statutes is amended to read:

SB275-AA54,3,4 5.64 (1) (ag) Except as authorized in s. 5.655, there shall be a separate ballot giving the names of all candidates for president and vice president and for statewide, congressional, legislative, Chippewa Valley technical college district, and county offices in the same form as prescribed by the board under s. 7.08 (1) (a).

SB275-AA54, s. 4 Section 4. 7.60 (4) (a) of the statutes is amended to read:

SB275-AA54,4,2 7.60 (4) (a) The board of canvassers shall make separate duplicate statements showing the numbers of votes cast for the offices of president and vice president; state officials; U.S. senators and representatives in congress; state legislators; justice; court of appeals judge; circuit judges; members of the Chippewa Valley technical college district boards; district attorneys; and metropolitan sewerage commissioners, if the commissioners are elected under s. 200.09 (11) (am). If a municipal judge elected under s. 755.01 (4) serves a municipality that is located partially within the county and candidates for that judgeship file nomination papers in another county, the board of canvassers shall prepare a duplicate statement showing the numbers of votes cast for that judgeship in that county for transmittal to the other county. For partisan candidates, the statements shall include the political party or principle designation, if any, next to the name of each candidate. The board of canvassers shall also prepare a statement showing the results of any county, technical college district, or statewide referendum. Each statement shall state the total number of votes cast in the county for each office; the names of all persons for whom the votes were cast, as returned; the number of votes cast for each person; and the number of votes cast for and against any question submitted at a referendum. The board of canvassers shall use one copy of each duplicate statement to report to the government accountability board, technical college district board, or board of canvassers of any other county and shall file the other statement in the office of the county clerk or board of election commissioners.

SB275-AA54, s. 5 Section 5. 7.60 (5) (a) of the statutes, as affected by 2011 Wisconsin Act 115, is amended to read:

SB275-AA54,4,23 7.60 (5) (a) Immediately following the canvass, the county clerk shall deliver or transmit to the government accountability board a certified copy of each statement of the county board of canvassers for president and vice president, state officials, senators and representatives in congress, state legislators, justice, court of appeals judge, circuit judge, members of the Chippewa Valley technical college district board, district attorney, and metropolitan sewerage commissioners, if the commissioners are elected under s. 200.09 (11) (am). The statement shall record the returns for each office or referendum by ward, unless combined returns are authorized under s. 5.15 (6) (b) in which case the statement shall record the returns for each group of combined wards. Following primaries the county clerk shall enclose on forms prescribed by the government accountability board the names, party or principle designation, if any, and number of votes received by each candidate recorded in the same manner. The county clerk shall deliver or transmit the certified statement to the government accountability board no later than 9 days after each primary except the partisan primary, no later than 10 days after the partisan primary and any other election except the general election, and no later than 14 days after the general election. The board of canvassers shall deliver or transmit a certified copy of each statement for any technical college district referendum to the secretary of the technical college district board.

SB275-AA54, s. 6m Section 6m. 7.70 (3) (d) of the statutes is amended to read:

SB275-AA54,5,12 7.70 (3) (d) When the certified statements and returns are received, the chairperson of the board or the chairperson's designee shall proceed to examine and make a statement of the total number of votes cast at any election for the offices involved in the election for president and vice president; a statement for each of the offices of governor, lieutenant governor, if a primary, and a joint statement for the offices of governor and lieutenant governor, if a general election; a statement for each of the offices of secretary of state, state treasurer, attorney general, and state superintendent; for U.S. senator; representative in congress for each congressional district; the state legislature; justice; court of appeals judge; circuit judge; Chippewa Valley technical college district board member; district attorney; metropolitan sewerage commission, if the commissioners are elected under s. 200.09 (11) (am); and for any referenda questions submitted by the legislature.

SB275-AA54, s. 7m Section 7m. 7.70 (6) of the statutes is created to read:

SB275-AA54,5,18 7.70 (6) Chippewa Valley technical college district board members; determinations. The government accountability board shall transmit to the secretary of the technical college district board a copy of the certified determination of the chairperson of the government accountability board or his or her designee for the election of each member of the Chippewa Valley district board.

SB275-AA54, s. 10m Section 10m. 8.15 (6) (ds) of the statutes is created to read:

SB275-AA54,5,22 8.15 (6) (ds) For the office of member of the the Chippewa Valley technical college district board from any election district, not less than 200 nor more than 400 electors.

SB275-AA54, s. 11 Section 11. 9.10 (1) (a) of the statutes is amended to read:

SB275-AA54,6,4 9.10 (1) (a) The qualified electors of the state, of any county, city, village, or town, of any congressional, legislative, judicial, town sanitary, or school district, or of the Chippewa Valley technical college district, or of any prosecutorial unit may petition for the recall of any incumbent elective official by filing a petition with the same official or agency with whom nomination papers or declarations of candidacy for the office are filed demanding the recall of the officeholder.

SB275-AA54, s. 12 Section 12. 9.10 (2) (b) of the statutes is amended to read:

SB275-AA54,6,9 9.10 (2) (b) A recall petition for a city, village, town, Chippewa Valley the Chippewa Valley technical college district, town sanitary district, or school district office shall contain a statement of a reason for the recall which is related to the official responsibilities of the official for whom removal is sought.

SB275-AA54, s. 13 Section 13. 9.10 (2) (d) of the statutes is amended to read:

SB275-AA54,6,24 9.10 (2) (d) No petition may be offered for filing for the recall of an officer unless the petitioner first files a registration statement under s. 11.05 (1) or (2) with the filing officer with whom the petition is filed. The petitioner shall append to the registration a statement indicating his or her intent to circulate a recall petition, the name of the officer for whom recall is sought and, in the case of a petition for the recall of a city, village, town, Chippewa Valley technical college district, town sanitary district, or school district officer, a statement of a reason for the recall which is related to the official responsibilities of the official for whom removal is sought. No petitioner may circulate a petition for the recall of an officer prior to completing registration. The last date that a petition for the recall of an officer may be offered for filing is 5 p.m. on the 60th day commencing after registration. After the recall petition has been offered for filing, no name may be added or removed. No signature may be counted unless the date of the signature is within the period provided in this paragraph.

SB275-AA54, s. 14 Section 14. 9.10 (3) (a) of the statutes is amended to read:

SB275-AA54,7,5 9.10 (3) (a) This subsection applies to the recall of all elective officials other than city, village, town, Chippewa Valley technical college district, town sanitary district, and school district officials. City, village, town, Chippewa Valley technical college district, town sanitary district, and school district officials are recalled under sub. (4).

SB275-AA54, s. 15 Section 15. 9.10 (4) (title) of the statutes is amended to read:

SB275-AA54,7,8 9.10 (4) (title) City, village, town, town sanitary district, Chippewa Valley technical college district, and school district offices.

SB275-AA54, s. 16 Section 16. 9.10 (4) (a) of the statutes is amended to read:

SB275-AA54,8,13 9.10 (4) (a) Within 10 days after a petition for the recall of a city, village, town, Chippewa Valley technical college district, town sanitary district, or school district official, is offered for filing, the officer against whom the petition is filed may file a written challenge with the municipal clerk or board of election commissioners or school district clerk official or agency with whom it is filed, specifying any alleged insufficiency. If a challenge is filed, the petitioner may file a written rebuttal to the challenge with the clerk or board of election commissioners official or agency within 5 days after the challenge is filed. If a rebuttal is filed, the officer against whom the petition is filed may file a reply to any new matter raised in the rebuttal within 2 days after the rebuttal is filed. Within 14 days after the expiration of the time allowed for filing a reply to a rebuttal, the clerk or board of election commissioners official or agency shall file the certificate or an amended certificate. Within 31 days after the petition is offered for filing, the clerk or board of election commissioners official or agency shall determine by careful examination of the face of the petition whether the petition is sufficient and shall so state in a certificate attached to the petition. If the petition is found to be insufficient, the certificate shall state the particulars creating the insufficiency. The petition may be amended to correct any insufficiency within 5 days following the affixing of the original certificate. Within 2 days after the offering of the amended petition for filing, the clerk or board of election commissioners official or agency shall again carefully examine the face of the petition to determine sufficiency and shall attach to the petition a certificate stating the findings. Immediately upon finding an original or amended petition sufficient, except in cities over 500,000 population and in technical college districts, the municipal clerk or school district clerk official shall transmit the petition to the governing body or to the school board. Immediately upon finding an original or amended petition sufficient, in cities over 500,000 population, the board of election commissioners shall file the petition in its office. Immediately upon finding an original or amended petition sufficient, in the Chippewa Valley technical college districts, the government accountability board shall file the petition in its office.

SB275-AA54, s. 17 Section 17. 9.10 (4) (d) of the statutes is amended to read:

SB275-AA54,8,20 9.10 (4) (d) Promptly upon receipt of a certificate under par. (a), the governing body, school board, or board of election commissioners , or government accountability board shall call a recall election. The recall election shall be held on the Tuesday of the 6th week commencing after the date on which the certificate is filed, except that if Tuesday is a legal holiday the recall election shall be held on the first day after Tuesday which is not a legal holiday.

SB275-AA54, s. 18 Section 18. 9.10 (7) of the statutes is amended to read:

SB275-AA54,8,25 9.10 (7) Purpose. The purpose of this section is to facilitate the operation of article XIII, section 12, of the constitution and to extend the same rights to electors of cities, villages, towns, the Chippewa Valley technical college districts, town sanitary districts, and school districts.

SB275-AA54, s. 19 Section 19. 11.26 (1) (c) of the statutes is amended to read:

SB275-AA54,9,3 11.26 (1) (c) Candidates for representative to the assembly or member of the Chippewa Valley technical college district board, $500.

SB275-AA54, s. 20 Section 20. 11.26 (2) (c) of the statutes is amended to read:

SB275-AA54,9,6 11.26 (2) (c) Candidates for representative to the assembly or member of the Chippewa Valley technical college district board, $500.

SB275-AA54, s. 21 Section 21. 11.31 (1) (f) of the statutes is amended to read:

SB275-AA54,9,11 11.31 (1) (f) Candidates for representative to the assembly or member of the Chippewa Valley technical college district board, $17,250 total in the primary and election, with disbursements not exceeding $10,775 for either the primary or the election.

SB275-AA54, s. 22 Section 22. 11.31 (1) (g) (intro.) of the statutes is amended to read:

SB275-AA54,9,16 11.31 (1) (g) (intro.) In any jurisdiction or district, other than the Chippewa Valley technical college district or a judicial district or circuit, with a population of 500,000 or more according to the most recent federal census covering the entire jurisdiction or district:

SB275-AA54, s. 23 Section 23. 17.01 (10m) of the statutes is created to read:

SB275-AA54,9,19 17.01 (10m) By a member of the Chippewa Valley technical college district board, to the secretary of the district board.

SB275-AA54, s. 24 Section 24. 17.02 (2) of the statutes is created to read:

SB275-AA54,9,23 17.02 (2) Chippewa Valley technical college district board. Of the resignation of the Chippewa Valley member of a technical college district board, by the secretary of the district board to the government accountability board.

SB275-AA54, s. 25 Section 25. 17.17 (2) of the statutes is created to read:

SB275-AA54,10,3 17.17 (2) Chippewa Valley technical college district board. In the office of member of a technical college district board, by the secretary of the district board to the government accountability board.

SB275-AA54, s. 26 Section 26. 17.27 (3) of the statutes is repealed and recreated to read:

SB275-AA54,10,14 17.27 (3) Chippewa Valley technical college district board. Except as provided in s. 9.10, a vacancy in the office of member of the Chippewa Valley technical college district board may be filled by temporary appointment of the remaining members of the district board. The temporary appointee shall serve until a successor is elected and qualifies. If the vacancy occurs in any year after the Tuesday after the first Monday in November, and on or before April 15, the vacancy shall be filled for the residue of the unexpired term, if any, at the succeeding general election. If the vacancy occurs in any year after April 15 or on or before the Tuesday after the first Monday in November, the vacancy shall be filled for the residue of the unexpired term, if any, at the 2nd succeeding general election.

SB275-AA54, s. 28 Section 28. 38.06 (6) of the statutes is created to read:

SB275-AA54,10,18 38.06 (6) Promptly upon issuance of a reorganization order for the Chippewa Valley technical college district by the board, the director of the board shall transmit a copy of the order to the government accountability board.

SB275-AA54, s. 30 Section 30. 38.08 (1) (a) 1. of the statutes is amended to read:

SB275-AA54,10,25 38.08 (1) (a) 1. A Except as provided in subd. 1m., a district board shall administer the district and shall be composed of 9 members who are residents of the district, including 2 employers, 2 employees, 3 additional members, a school district administrator, as defined under s. 115.001 (8), and one elected official who holds a state or local office, as defined in s. 5.02. The board shall by rule define "employer" and "employee" for the purpose of this subdivision.

SB275-AA54, s. 31 Section 31. 38.08 (1) (a) 1m. of the statutes is created to read:

SB275-AA54,11,6 38.08 (1) (a) 1m. The members of the Chippewa Valley district board shall be elected to represent numbered election districts within the Chippewa Valley technical college district by the electors of each election district at the general election. Each member of the district board shall be an elector of the numbered election district within the technical college district for which he or she seeks office.

SB275-AA54, s. 32 Section 32. 38.08 (1) (b) of the statutes is amended to read:

SB275-AA54,11,9 38.08 (1) (b) District Except as provided in par. (c), district board members shall take office on July 1 and shall serve staggered 3-year terms.

SB275-AA54, s. 33 Section 33. 38.08 (1) (c) of the statutes is created to read:

SB275-AA54,11,18 38.08 (1) (c) District board members in the Chippewa Valley technical college district take office on the first Monday in January following their election and shall shall serve 4-year terms. Promptly upon receipt of the determinations from the government accountability board under s. 7.70 (6) and upon appointment of any person to fill a temporary vacancy on the district board, the secretary of the Chippewa Valley technical college district board shall send written notification of the name and address of each member and expiration date of each member's term to the director of the technical college system board.

SB275-AA54, s. 34 Section 34. 38.08 (1g) of the statutes is repealed.

SB275-AA54, s. 35 Section 35. 38.08 (2) and (2m) of the statutes are amended to read:

SB275-AA54,12,2 38.08 (2) Members of a district board other than the Chippewa Valley technical college district board shall serve until their successors are appointed and qualified. A vacancy shall be filled for any unexpired term of more than 90 days in the manner provided for the making of original appointments in s. 38.10, except that if a vacancy occurs within 120 days preceding a spring election, the vacancy need not be filled until 60 days after the spring election, in the manner provided in s. 38.10.

SB275-AA54,12,5 (2m) Any member of a district board other than the Chippewa Valley technical college district board serving as an elected official under sub. (1) (a) 1. shall cease to be a member upon vacating his or her office as an elected official.

SB275-AA54, s. 36 Section 36. 38.08 (6) of the statutes is created to read:

SB275-AA54,12,19 38.08 (6) (a) Within 90 days after the population count by block, established in the decennial federal census of population, and maps showing the location and numbering of census blocks become available in printed form from the federal government or are published for distribution by an agency of this state or within 90 days after alteration of the boundaries of an existing district, the district board of the Chippewa Valley technical college district shall apportion and prescribe the boundaries of 9 numbered election districts within the district, to be as nearly equal in population as possible. Alterations in election districts resulting from boundary changes to the existing district may be made only to the extent required to facilitate the change. Insofar as possible, each election district shall be compact and observe the community of interest of existing neighborhoods. A detailed map and description of each election district prescribed by the district board shall be prepared and transmitted by the district board to the director of the technical college system board.

SB275-AA54,13,2 (b) All proposed district boundaries prescribed by the Chippewa Valley technical college district board under par. (a) shall become effective only upon their approval by the technical college system board. If the technical college system board disapproves the proposed boundaries, the district board shall submit a revised districting plan for approval of the technical college system board. Upon approval of the election district boundaries within any district, the technical college system board shall promulgate the boundaries established under par. (a) as a rule under ch. 227. The boundaries shall become effective on the effective date of the rule.

SB275-AA54, s. 37 Section 37. 38.10 (1) (intro.) of the statutes is amended to read:

SB275-AA54,13,6 38.10 (1) (intro.) District board members in districts other than the Chippewa Valley technical college district shall be appointed by an appointment committee constituted as follows:

SB275-AA54, s. 38 Section 38. Nonstatutory provisions.